BIOS Setup Program
The Setup program is for viewing and changing the BIOS settings for a computer.
Pressing the Delete key after the POST memory test begins and before the
operating system boot begins accesses setup.
The table below shows the function keys available for use in the menu screens.
Table 8: BIOS Navigation
Setup Key Description
Esc or <Alt X> Exits the menu.
<? > and <?>
Selects fields in the current menu
<? > and <? >
Selects menus on menu bar
<Home>/<End> Moves to the top/bottom item of current menu.
<Pg up> and <Pg Dn> Moves to the previous/next page on scrollable menus.
<F5> or <-> Selects next lower value
<F6>, <+> and <Space> Selects next higher value
<Enter> or <Return (? )>
Selects Sub Menus
<F9> Loads default settings
<F10> Saves current settings and exits Setup
<F1> or <Alt + H> Help
Main BIOS Setup
All main Setup options are described in this section. The main BIOS Setup screen is
displayed below.
Use the Up/Down arrow keys to move among the different settings in each menu.
Use the Left/Right arrow keys to change the options for each setting.
Press the <Esc> key to exit the CMOS Setup Menu. The next section describes in
detail how to navigate through the menus.
Items that use submenus are indicated with the icon. With the item highlighted,
press the <Enter> key to access the submenu.
To Next Page
Loading...
