Primary Master/Primary Slave Sub-Menu
These settings allow the user to set the parameters of the IDE Primary Master/Slave
slots. Hit <Enter> to activate the following sub-menu screen for detailed options of
these items. Set the correct configurations accordingly. The items included in the
sub-menu are:
Figure 14: Primary Master/Primary Slave/Secondary Master/Secondary Slave Sub-Menu
IDE HDD Auto-Detection
This option allows the user to determine the manner in which the Award BIOS sets
the settings for the IDE Primary Master Device. The options are "None", "Auto" and
"Manual."
IDE Primary Master
Press the <Enter> key to activate the 'IDE HDD Auto-Detection" function, which will
allow BIOS to automatically detect the status of the IDE HDD installed in the system,
such as the size, the number of cylinders, the configurations of items such as Head,
Precomp, Landing Zone and Sector.
Access Mode
This item determines the location through which the Award BIOS accesses the IDE
Primary Master Device. The settings are "CHS", "LBA", "Large", and "Auto".
To Next Page
Loading...
