30
11. Instruction for use
12. Introduction
Congratulations on the purpose of your Derby
whirl tub.
You have purchased a product of proven brand
quality, which features a superb, exclusive de-
sign and outstanding luxury.
Derby whirl tub are continuously adjusted to
keep them state of the art and so that they will
meet your relaxation and recuperation needs.
The following pages contain explantations on
how to use and look after your den Derby tub
so that you can enjoy many happy hours in your
new tub.
We wish you many houers of pleasure in your
Derby whirl tub!
13. Keypad
123456
789101112
1 Switches everything OFF.
2 air pump on/off. Short pressing of
button 2 turns the pump on with
100% power. Pressing this button dur-
ing operation turns the pump off.
3 air pump power control button and
wave effect button from air jets. Ac-
tive when air pump is on. Short press-
ing of button 3 changes the air pump
performance. The adjustment is as
follows: at further pressing the button
reduced the revolution speed to the
minimum value. After the pump has
reached the minimum speed, and but-
ton 3 is still pressed, the speed of the
pump is increased to the maximum
value. The pump speed control range:
30 – 100%. Holding button 3 for 5
sec. switches on wave effect from the
air jets. By Pressing button 3 while the
wave effect is active, the wave effect
switches off and speed stabilizes at
the current level.
4 lighting on/off
5 power control button of water
pump. Button active during water
pump operation. Each button pressing
changes water pump performance.
The adjustment is as follows: further
pressing reduced the revolution speed
to the minimum value. After the pump
has reached the minimum speed, and
button 5 is still pressed, the speed of
the pump is increased to the maxi-
mum value. The pump speed control
range: 50 – 100%. Holding the but-
Subject to technical alterations! Warranty is only granted, if all mentioned instructions were followed.
To Next Page
Loading...
