© 2011 Viking Preferred Service
38
Service Diagnostics and Procedures
Freezer Drawer, Baskets, and Glide
Adapters (continued)
3. From underneath the upper basket, press
release clips inward on left and right glide
adapters.
4. Pull door and drawer slides forward to remove.
5. Slide out upper basket and remove ice maker
tray.
6. Slide upper basket back in. Remove left and
right upper basket glide adapter securing
screws.
4. Reverse procedure to reinstall.
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Service Diagnostics and Procedures–Disassembly
Tab
Tab
Ice Maker Tray
Screw
Screw
To Next Page
Loading...
