© 2011 Viking Preferred Service
37
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Service Diagnostics and Procedures–Disassembly
Freezer Light Housing (continued)
3. Lower light housing, disconnect wiring and
press tab to release light socket from housing.
4. Replace or repair as necessary.
5. Reverse procedure to reinstall.
Freezer Drawer, Baskets, and Glide
Adapters
1. Open freezer drawer fully.
2. Grasp center bracket on lower basket and lift
straight up to remove.
Wiring
Tab
Bracket
To Next Page
Loading...
