16
Area management
• Using and you set the hue (fixed) of the lamp once it is turned on.
The hue displayed will match the position of the cursor in the desired colour
• With and on Saturation you set the percentage of "vividness" of the colour.
• With and on Brightness you set the percentage of "contrast" of the colour.
• Tapping confirms the settings you have made.
• Tapping icon opens the screen where you make the Fading-Show settings.
The function of Fading-Show allows to set a cyclical sequence of colors (up to a maximum of 6) for color changes
and the play of light in the environments where the lamps are installed RGB.
To Next Page
Loading...