17
Area management
• With and on Persistance you set the time during which each of the colors remains fixed.
• With and on Transition you set the time that elapses between the passage of a gradual color
to the next.
• Tapping confirms the settings you have made.
• Tapping the icon associated with each of the colors that make up the sequence is going to change the
color characteristics of that color; in fact will see the following screen:
• With and you set the tone of color that will match the position of the cursor to the position desired
color.
• With and you set Saturation and Brightness.
• Tapping confirms the settings you have made.
• Tapping you remove the color selected by the sequence of Fading-Show and the screen will become
as follows:
To Next Page
Loading...