Vimar ELVOX 46235.020C - North Setup; New Password And Change Password; Auto Exit Time; Camera Setup

54
Graphic User Interface (GUI) for IP Speed Dome
EN
4.2.6 North setup
GotoSystemSetup NorthSetup,thefollowingscreenwillopen:PICTUREBELOW
1-choosethepositionbyclickingonthedirectionbuttons.
2-SelectSTOREtosavetheposition.
Enter the password by clicking or button.
Numbersfrom0to9areavailable.Thepasswordshouldbe6characters.
Emptypasswordisinvalidwhenyousetthenewpassword.
Passwordneedstobeinputwhenyouloginnexttime.
- Change Password
Enterthecurrentpasswordandtheninputthenewpasswordtwice.(Pleasereferto“NewPassword”fordetails.)
Inputtingemptynewpasswordmeanstodeletethecurrentpassword.
4.2.7 Auto Exit Time
GotoSystemSetup NextPage AutoExitTime.Youmaysetthetimetoexitthemenuautomaticallyas
required.
4.3 Camera Setup
Afteryougotocamerasetupmenu,youwillseethefollowingmenu.
4.2.7 New Password and Change Password
- New Password