Vimar ELVOX 46235.020C - Day & Night Setup; Video Format; Dome Function; Preset Setup

57
Graphic User Interface (GUI) for IP Speed Dome
EN
4.3.4 Day & Night Setup
Day&NightModeincludesthreemodes:Auto,Night,DayandTime.
-Auto:Camerawillautomaticallyswitchthemodebetweendayandnightaspertheambientillumination.
-Night:Thecamerawillbenightmodeatalltime.You’dbetterusethismodeatnight.
-Day:Thecamerawillbedaymodeatalltime.You’dbetterusethismodeindaytime.
-Time:Camerawillregularlyswitchthemodebetweendayandnightaccordingtothesetdayandnighttime.Day&
NightModewillbedisabledifenablingthisfunction.
- IR Sensitivity
SettheleveloftheIRsensitivity.Thehigherthevalueis,themorethesensitivityis.
4.3.5 Video Format
PALorNTSCisoptional.
4.4 Dome Function
GotoDomeFunctionmenuasshownbelow:
4.4.1 Preset Setup
Thisfunctionisusedtomemorizethespecicpositionofpan,tilt,zoomandfocus,givingmuchconvenienceforquick
returntothispositionbycallingpreset.
1-Selectingthepresetsetupmenubringsupthefollowingmenu.
2-Selectthepresetnumber.
3-GotoEditCURPresetinterfaceasbelow: