Vimar ELVOX 46235.020C - Load Default; Dome Function; Alarm Configuration; Motion Detection

66
Graphic User Interface (GUI) for IP Speed Dome
EN
5.3.3 Load Default
Itincludesthefunctionofreset,clearandrestart.PleaserefertoChapter4.6formoredetails.
5.3.4 Dome Function
Domefunctionincludespresetsetup,cruisesetup,groupsetup,tracksetup,tasksetup,alarmsetup,homeposition
setupandwipersetup.PleaserefertoChapter4.4DomeFunctionformoredetails.
5.4 Alarm Conguration
Alarmcongurationincludesfoursubmenus:MotionDetection,AlarmIn,AlarmOutandAlarmServer.
5.4.1 Motion Detection
To set motion detection:
1-GotoCong Alarm MotionDetectiontosetalarmtrigger.
Check“EnableAlarm”checkboxtoactivate motionbasedalarm,choosealarmholdingtime andsetalarmtrigger
options.
Alarm Out:Ifselected,thiswouldtriggertheexternalrelayoutputondetectingamotionbasedalarm.TriggerSnap:If
selected,thesystemwillsnapimagesonanalarmandsavetheminSDcard.
Trigger Email:Iftheemailandattachpicturecheckboxischecked(EmailaddressshallbesetrstintheMailcong
interface),thetriggeredsnappicturesandeventwillbesentintothoseaddresses.
Trigger FTP:If“Uploadingpicture”ischecked,thetriggeredsnappictureswillbesentintoFTPserveraddress.Please
refertoFTPcongurationchapterformoredetails.
2-Setmotiondetectionareaandsensitivity.Click“AreaandSensitivity”tabtoseethefollowingsub-menu.