Vimar ELVOX 46235.020C - Alarm Server; Network Configuration; Tcp;Ipv4

69
Graphic User Interface (GUI) for IP Speed Dome
EN
5.4.4 Alarm Server
Goto“Alarmconguration”
“AlarmServer”interfaceasshownbelow.
Youmayinputthealarmserveraddressandport.Whenthealarmhappens,thecamerawillautomaticallytransferthe
alarmeventtothealarmserver.Ifthealarmserverisnotused,thereisnoneedforyoutocongurehere.
5.5 Network Conguration
5.5.1 TCP/IPv4
GotoCong Network TCP/IPv4.
Therearetwowaysfornetworkconnection.
- UseIPaddress.TherearetwooptionsforIPsetup:obtainanIPaddressautobyDHCPprotocolandusethefollow-
ingIPaddress.Pleasechooseoneofoptionsforyourrequirements.
- UsePPPoE:EntertheusernameandpasswordfromyourISP.
TriggerEmail:whentheIPaddressofthedeviceischanged,anewIPaddresswillbesenttotheappointedmailbox
automatically
TriggerFTP:whentheIPaddressofthedeviceischanged,anewIPaddresswillbesenttoFTPserver.
Youcanchooseeitherwayofthenetworkconnection.
IfyouusePPPoEtoconnectinternet,youwillgetadynamicWANIPaddress.ThisIPaddresswillchangefrequently.
YoumayusethefunctionofIPchangenotication.