Vimar ELVOX 46235.020C - Home Position; Display Setup

61
Graphic User Interface (GUI) for IP Speed Dome
EN
4.4.7 Home Position
GotoSystemSetup HomePositionmenuasshownbelow:
Thesettingsteps:
1-Enablethehomepositionfunctionandselectthepresetwhichshouldbesetinadvance.
2-Thenselectdelaytime(rangefrom007sto180s)andexitthemenu.
 Whenthestand-bytimeofthedomecameraexceedsthedelaytime,thecamerawillautomaticallyexecutethe
commandtomonitortheselectedpreset.
 ATTENTION:AllthefunctionsdescribedabovecanalsobeconguredfromtheWEBinterfaceonthePTZFunction
screeninthepicturebelow.
4.5 Display Setup
Youcanenabletitledisplayandtimedisplayifyouneed.(Somemodelsmaysupporttemperaturedisplayorsystem
display).