Vimar ELVOX 46235.020C - Load Default; 5 Remote Configuration; System Configuration; Basic Information

62
Graphic User Interface (GUI) for IP Speed Dome
EN
5 Remote Conguration
5.1 System Conguration
The“Systemconguration”includesfoursub-menus:BasicInformation,DateandTime,LocalCongandSDCard.
5.1.1 Basic Information
IntheBasicInformationinterface,youcanchecktherelativeinformationofthedevice.
5.1.2 Date and Time Conguration
GotoCong
System DateandTime.Pleaserefertothefollowinginterface.
4.6 Load Default
Therearethreemenus,includingmasterreset,masterclearandsystemreboot.
(MasterReset):Restorethecamerastateandactivemenutofactorydefaultbutdonotclearthoseparameterssuch
aspreset,cruise.
(MasterClear):Restorethecameratofactorydefault.
(SystemReboot):Rebootthecamera.
YoucanselectthetimezoneandDSTasrequired.