Vimar ELVOX 46235.020C - Reboot Device; Upgrade; Log

77
Graphic User Interface (GUI) for IP Speed Dome
EN
- Import & Export Setting:
YoucanimportorexportthesettinginformationfromPCortodevice.
1.Click“Browse”toselectsavepathforimportorexportinformationonPC.
2.Click“ImportSetting”or“ExportSetting”button.
- Default Setting
Click“Loaddefault”buttontorestoreallsystemsettingstodefaultstatus.
5.7.2 Reboot Device
GotoCong Maintenance Reboot.
Click“Reboot”buttontorebootthedevice.
5.7.3 Upgrade
GotoCong Maintenance Upgrade.Inthisinterface,youcanupgradesystemandPTZ.
1-Click“Browse”buttontoselectthesavepathoftheupgradele
2-Click“Upgrade”buttontostartupgradingtheapplicationprogram.
3-Thedevicewillrestartautomatically
4-Afteryousuccessfullyupdatethesoftware,click“OK”buttontocloseIEandthenre-openIEtoconnectIP-Cam.
Caution!Youcan’tdisconnecttoPCorclosetheIP-CAMduringupgrade.
5.7.4 Log
Toqueryandexportlog1.GotoCong
Maintenance OperationLog.
2.Selectthemaintype,subtype,startandendtime.
3.Click“Query”toviewtheoperationlog.
4.Click“Export”toexporttheoperationlog.
YoucanviewtherunlogbyclickingCong Maintenance RunLog.