Vimar ELVOX 46235.020C - Grouping Setup; Task Setup

59
Graphic User Interface (GUI) for IP Speed Dome
EN
4.4.3 Grouping Setup
GotoDomeFunction GroupingSetupasbelow:
Goto“EditGrouping”menuasshownbelow.
8cruisescanbesetinagroup.CRU1standsforCruise1,CRU2standsforCruise2andsoon.“RunGrouping”
meanstorunthecruisesinorder.
4.4.4 Task Setup
GotoDomeFunction TaskSetupmenuasshownbelow:
Bydividing24hoursintoseveralperiodsandappointingdi󰀨erentcommandsforeachperiod,thecamerasystemwill
automaticallyexecutethecommandsaccordingtothesettimeifthereisnooperation.SettingSteps:
1-Enablethetask.
2-Setthetask.
TimeFormat:StartTime–EndTime.Thetaskswillbeautomaticallyexecutedinchronologicalorder.TaskType:RSC,
ASC,PRE,CRU,TRA.
Note:Thehomepositionfunctionwillbedisabledifenablingtasksetting.