15
TAB: 7559
EN
Ringtone mute
Use and to enable/disable the ringtone of the internal unit, for calls from outdoor unit, as follows:
ICON IMAGE CONDUCT
Ringtone on
Ringtone mute. The internal
unit does not ring, but
otherwise functions normally.
User away. The internal unit
does not ring and does not
switch on. With conguration
via SaveProg (ag ACK. Grp.
Excl. S) it is possible to ring
secondary internal units,
otherwise the call from the
outdoor unit is rejected and
unsuccessful
Ringtone mute is the same function assigned with T3 to an internal unit in standby or call mode.
The ringtone mute function does not apply to calls received from an internal unit or porter switchboard.
Press T4
to conrm, C to cancel without saving.
Note: in the remaining part of this manual, it is assumed that the functions of T1, T4 and C are understood.
Default: ringtone enabled.
To Next Page
Loading...
