33
TAB: 7559
EN
Association of an internal unit
Awaiting association of the internal unit to be called
In this condition, on the internal unit that is to be called, press a key that can be identied unequivocally. It is advisable
to use a key that controls opening of a lock, but you can also use a key that operates a relay or controls one of the F1
or F2 outputs of an external unit. If the internal unit that is to be called has a handset, it is advisable to use the lock with
the handset replaced.
Once the association has been made, the basic menu of the Intercom context will appear as follows (the internal unit
to be called is number 4):
To Next Page
Loading...
