Vimar ELVOX 7559 - Select the Actuations

29
TAB: 7559
EN
Select the actuations
The item opens a list of selectable actuations:
Selecting the actuations
There are 6 default actuations. These are the rst 4 relays and F1 / F2 on the last outdoor unit the internal unit com-
municated with or was called from.
If previously the installer has changed the function associated to this, it is present in the list of selectable actuations,
highlighted with the current value:
Using SaveProg it is possible to draft the list of selectable actuations in order to include:
• 16 relays
• locks on 15 outdoor units
• Lock of the last outdoor unit
• F1 for 15 divided outdoor units, depending on the state of the ag “F1/F2 1-8” in SaveProg, in:
o Outdoor units 1 to 8
o Outdoor units 9 to 15
• F1 of the last outdoor unit
• F2 for 15 divided outdoor units, depending on the state of the ag “F1/F2 1-8” in SaveProg, in:
o Outdoor units 1 to 8
o Outdoor units 9 to 15
• F2 of the last outdoor unit
When the list has a number of items that ll 3 or more conguration pages (this happens with at least 18 elements), in
T1 the
icon appears and is used to move quickly from one page to another. The following gures show the situation
with all permitted actuations: