32
TAB: 7559
EN
Intercom
With the option you can change the IDs of internal units or porter switchboards to be used in the Intercom context.
The default setting is blank:
Intercom menu
Each line corresponds to one of the four keys in the Intercom context. On selecting one of these four options, a sub
menu opens:
Selection of intercom type
The three options that appear are:
•
to associate an internal unit with the selected position.
•
to associate a porter switchboard with the selected position.
•
to associate the Alert function with the selected position.
•
to cancel the association with the selected position (visible only if the position is programmed).
To Next Page
Loading...
