To Next PageTo Next Page
Need help?Do you have a question about the Vimar TAB 7539 and is the answer not in the manual?
General| Mounting | Wall-mounted |
|---|---|
| Resolution | 800 x 480 pixels |
| Touchscreen | Yes |
| Camera | Yes |
| Night vision | Yes |
| Hands free operation | Yes |
| Colour | White |
| Power supply | 24 V DC |
| Installation technology | 2-wire |
| Display | 7-inch TFT LCD |
Detailed product specifications including installation, display, power, and dimensions.
Compliance with electromagnetic compatibility directives.
Describes the auto-start and camera view function of button A.
Describes button B for chime muting and missed calls.
Describes button C for door lock release.
Describes button D for stair light.
Describes button F for talk/listen and intercom calls.
Describes button G for adjusting volume, contrast, and voice.
Describes button H for brightness adjustment.
Describes buttons 1, 2, 3, 4 for intercom or auxiliary functions.
Indicates calls received by the indoor station.
Indicates missed calls or user away status.
Indicates the device is in configuration mode.
Shows when the voice unit is active.
Indicates if a door or gate has been left open.
Shows when the device is in the configuration phase.
Identifies terminals 1 and 2 for the digital BUS line.
Identifies the FP terminal for the landing call button.
Identifies the M terminal for earth reference.
Describes the terminal board integrated with the mounting plate.
Details the housing for the anti-theft screw.
Describes the tab for attaching the speech unit.
Explains the device's suitability for hearing aid users.
Advises installing the device at approx. 160 cm height.
Recommends a minimum distance from surrounding walls.
Step 1: Securing the mounting plate.
Step 2: Wiring the integral terminal block.
Step 3: Terminating the video signal.
Step 4: Installing the indoor station on the plate.
Step 5: Preventing accidental unhooking with an anti-theft screw.
Describes the top catch for securing the indoor station.
Describes the terminal board attached to the mounting plate.
Details the housing for the anti-theft screw.
Describes the tab for attaching the speech unit.
Instructions on how to unhook the station using a tool.
Select DIP switch to terminate video signal based on cable type.
Describes termination for 100 Ohm BUS cable.
Describes termination for 50 Ohm BUS cable.
Explains manual and advanced ID configuration methods.
Details the manual process for setting the primary ID code.
Explains automatic setup for secondary ID codes.
Describes how to reset device configurations to default.
How to adjust the chime volume level.
How to adjust screen brightness.
How to adjust screen contrast.
Adjusting audio volume for external calls.
Adjusting audio volume for internal calls.
How to mute chime and manage missed calls.
How to answer and end a call.
Details on landing calls from FP/M systems.
How to call other indoor units.
How to mute chime during an incoming call.
How to send the door lock command.
How to activate video/audio using a dedicated button.
How to call the concierge.
Basic ID and secondary ID setup.
Steps to program the ID code using a MASTER panel.
Steps for automatic setup of secondary IDs.
How to reset device configurations.
Setting the chime volume across 10 levels.
Adjusting screen brightness.
Adjusting screen contrast.
Adjusting external call audio volume.
Adjusting internal call audio volume.
Function to mute chime and handle missed calls.
Procedures for answering and ending calls.
Details on landing calls from FP/M systems.
How to call other units.
Muting chime during an incoming call.
Sending the door lock command.
Activating video/audio.
Procedure for calling the concierge.
Basic ID and secondary ID setup.
Steps for primary ID setup.
Steps for automatic setup for multiple stations.
How to reset configurations.
Setting the chime volume across 10 levels.
Adjusting screen brightness.
Adjusting screen contrast.
Adjusting external call audio volume.
Adjusting internal call audio volume.
Function to mute chime and handle missed calls.
Procedures for answering and ending calls.
Details on landing calls from FP/M systems.
How to call other units.
Muting chime during an incoming call.
Sending the door lock command.
Activating video/audio.
Procedure for calling the concierge.
Basic ID and secondary ID setup.
Steps to configure the primary ID code.
Steps for configuring secondary IDs for multiple stations.
How to reset device configurations.
Setting chime volume on 10 levels.
Adjusting brightness during calls or self-start.
Adjusting contrast during self-start.
Adjusting audio volume for external calls.
Adjusting audio volume for internal calls.
Muting chime and handling missed calls.
Procedures for answering and ending calls.
Details on landing calls from FP/M systems.
How to call other units.
Muting chime during an incoming call.
Sending the door lock command.
Activating video/audio with a button.
Procedure for calling the concierge.
Basic ID and secondary ID setup.
Steps for primary ID setup.
Steps for automatic secondary ID setup.
Procedure to reset device configurations.
Setting chime volume on 10 levels.
Adjusting brightness during calls or self-start.
Adjusting contrast during self-start.
Adjusting external call audio volume.
Adjusting internal call audio volume.
Function to mute chime and handle missed calls.
Procedures for answering and ending calls.
Details on door calls from FP/M systems.
How to call other units.
Temporarily excluding chime during a call.
Sending the door lock command.
Activating video/audio.
Procedure for calling the concierge.
Basic ID and secondary ID setup.
Steps for primary ID setup.
Steps for automatic secondary ID setup.
Procedure to reset device configurations.
Setting chime volume on 10 levels.
Regulation during communication/self-start.
Regulation during self-start.
Adjusting external call audio volume.
Adjusting internal call audio volume.
Function to mute chime and handle missed calls.
Procedures for answering and ending calls.
Details on landing calls from FP/M systems.
How to call other units.
Temporarily excluding chime during a call.
Sending the door lock command.
Activating video/audio.
Procedure for calling the concierge.
Basic ID and secondary ID setup.
Steps for primary ID setup.
Steps for automatic secondary ID setup.
Procedure to reset device configurations.
Setting chime volume on 10 levels.
Adjusting brightness during communication/self-start.
Adjusting chime volume during self-start.
Adjusting external call volume.
Adjusting internal call volume.
Muting chime and handling missed calls.
Procedures for answering and ending calls.
Details on calls from FP/M systems.
How to call other units.
Temporarily deactivating chime during a call.
Sending the door lock command.
Activating video/audio.
Procedure for calling the concierge.
Setting chime volume on 10 levels.
Adjusting brightness during connection/self-start.
Adjusting contrast during self-start.
Adjusting external call volume.
Adjusting internal call volume.
Muting chime and handling missed calls.
Procedures for answering and ending calls.
Details on calls from FP/M systems.
How to call other units.
Temporarily excluding chime during a call.
Sending the door lock command.
Activating video/audio.
Procedure for calling the concierge.
Configure secondary ID when one call activates multiple stations.
Procedure to reset device configurations.
Table mapping Master ID to Secondary IDs.
Shows the wiring for in/out configuration.
Indicates the termination to be applied.
Shows wiring with cable terminating indoors.
Details on connecting the FP/M terminal.
Product must be collected separately at end of life.
Options for returning or collecting used products.
Proper waste separation aids recycling, treatment, and disposal.
