Installation & User Manual System CTB-100V
39
4.3.7 Operation from VH-10M / VH-10M-T
Substation Operationpanel
• Press CALL button.
• Indicated with flashing green LED
and a signal in the operation panels
speaker for selected line.
• Operator of the operation panel press
respective LINE button, the call is set
up. Indicated by steady green light in
the operation panel.
• Speak clearly into the
Re-entrant loudspeaker for
communication to the operation panel,
and receive communication in the same
loudspeaker.
• Operator of the operation panel end
the call by pressing the LINE button
once more .
4.3.8 Operation from VHM-10 / VHM-10-T
Substation Operationpanel
• Press the CALL button.
• Indicated with flashing green LED
and a signal in the operation panels
speaker for selected line.
• Operator of the operation panel press
respective LINE button, the call is set
up. Indicated by steady green light,
PTT SWITCH
• Press the PTT SWITCH.on the
microphone. Speak clearly into the
microphone. When PTT SWITCH is
released the VHM-10 will be in
listening mode, and you will hear the
communication from the operation
panel in the loudspeaker.
• Operator of the operation panel end
the call by pressing the LINE button
once more .
To Next Page
Loading...