Vinten Osprey Plus - Water, Moisture and Dust; Operating Environment; Cleaning; Maintenance

3
Safety
Water, Moisture and Dust
Operating Environment
Cleaning
Maintenance
Critical Data
!
WARNING! The product must only be operated on a
smooth and level surface.
!
WARNING! The product must always be secured (all
three wheel brakes applied) when left unattended. Do not
leave the product unattended on a sloping surface.
!
CAUTION! Do not exceed the payload limit for the
product of 70 kg (154 lb).
!
CAUTION! The product must only be operated with a
minimum payload of 10 kg (22 lb) to pre-load the column
correctly.
!
WARNING! Protect the product from water, moisture and
dust.
!
WARNING! The product should not be used outside
the operating temperature limits. Refer to the product
technical specications for the operating limits for the
product.
!
CAUTION! Do not use solvent or oil-based cleaners,
abrasives or wire brushes. Clean with a dry lint free cloth.
!
WARNING! The tting of non-approved parts or
accessories, or the carrying out of non-approved
alterations or servicing can be dangerous and could
a󰀨ect the safety of the product. It may also invalidate the
terms and conditions of the product warranty.
Mass
Pedestal unladen:. .. .. 29.3 kg / 64.8 lb
Pressure
Maximum pressure:. .. 11.7 bar (170 psi)
Load
Maximum load: . .. .. .. 70 kg / 154 lb
≤ 70 kg
155 lb
≤ 11.7 bar (170 psi)