Vinten Vector 70 - Installation and Operation; Installation Procedures

13
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Section 2
Installation and Operation
Contents Para
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Mounting the head
Flat base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Mitchell-type fixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Pan bars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Fitting a camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Balancing the head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operation
Locking the platform. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Pan and tilt brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Pan and tilt drag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Introduction
1 This section includes instructions for mounting the Vector 70 pan and tilt head, fitting and balancing a
camera and operating the head. Refer to Fig 1.1 to identify the parts and controls. For further operating
instructions, please refer to Vector 70/70H Operators Guide, Publication Part No. 3354-8.
Installation
Unpacking
2 The head is supplied with one pan bar, a battery (fitted) for the level bubble illumination unit and an
Operators Guide. The flat base version is supplied with four mounting bolts, four washers and a spanner. The
Mitchell fixing version is supplied with a light-weight Mitchell adaptor. A second telescopic pan bar or short
pan bar for use with a zoom or focus controller are optional. Ensure that all items are unpacked prior to
disposal of the packing materials.