Vinten Vector 70 - Page 60

60
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.3 Vector 70/70H Pan and Tilt Head - Base
Item Part No Nomenclature Qty
1 M006-718 Screw, cap head, socket, M5 x 40 mm long 1
2 3354-23 Brake lever support cap assembly (Fig 6.5), OR 1
3354-48 Brake lever support cap assembly (Vector 70H) (Fig 6.5) 1
3 3354-347* Buffer pad 1
4 3354-337* Cover plate (plastic) 1
5 M004-103* Screw, countersunk head, pozidrive, M3 x 8 mm long 12
6 3354-53 Brake lever guide bonding assembly 1
7 3354-304 Cover plate (Right hand) 1
8 3354-25* Cover plate /PCB assembly (complete with switch, PCB, LED and battery
connector)
1
9 M004-511* Screw, button head, socket, M3 x 5 mm long 1
10 3354-20 Pan drag/brake assembly (Fig 6.4) 1
11 M006-738 Screw, low-profile, cap head, socket, M5 x 25 mm long 4
12 M006-740 Screw, low-profile, cap head, socket, M5 x 20 mm long 3
13 L801-105 Pin, dowel, 1/8 in. dia. x 9/16 in. long 1
14 3354-293 Serrated boss 1
15 M600-006* Washer, plain, heavy, M5 1
16 M006-737* Screw, low-profile, cap head, socket, M5 x 6 mm long 1
17 3354-292* Knob bung 1
18 3354-340* Drag knob 1
19 M005-717 Screw, cap head, socket, M4 x 10 mm long 3
20 3354-305 Location disk 1
21 M600-106 Washer, plain, light, M8 1
22 3354-307 Shaft (Pan drag knob) 1
23 3354-334 Cover (Base housing left hand) 1
24 M006-704 Screw, cap head, socket, M5 x 16 mm long 1
25 M006-705 Screw, cap head, socket, M5 x 20 mm long 1
26 3354-24* Base housing (bonding) assembly 1
3354-32 Support cap assembly left hand, comprising: 1