Vinten Vector 70 - Page 85

85
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.12 Vector 70/70H Pan and Tilt Head - Pan Bars
Item Part No Nomenclature Qty
3219-62 Pan bar and clamp assembly, comprising:
1 M007-506 Screw, button head, socket, M6 x 20 mm long 1
2 3308-159 Washer 1
3219-60 Pan bar clamp assembly (Vector 70), consisting of:
3 M600-009 Washer, plain, heavy, M8 2
4 3219-283 Pan bar clamp shaft [was 3354-295] 1
5 L801-105 Pin, dowel, 1/8 in. dia. x 9/16 in. long 1
6 3354-293 Serrated boss 1
7 3354-290 Knob 1
8 3354-292* Knob bung 1
9 M006-737* Screw, low-profile, cap head, socket, M5 x 6 mm long 1
10 M600-006* Washer, plain, heavy, M5 1
11 3219-280 Pan bar clamp (Vector) 1
3219-61 Pan bar assembly (Vector 70), consisting of:
3219-65 Fixed bar assembly (Vector 70), consisting of:
12 M500-085 Threaded-insert, blind captive nut, M6 1
13 3219-290 Fixed tube spigot end for long bar 1
14 3219-291 Fixed tube control end long 1
15 J550-093 Plug, tube-end, to fit 1 in. tube OD 1
3219-64 Sliding tube assembly (Vector 70), consisting of:
16 3219-276 Pan bar grip (Mk 7B) 1
17 J550-104 Plug, tube-end, to fit 1-1/4 in. tube OD 1
18 3219-63 Sliding tube / clamp assembly (Vector 70) 1
19 3219-289 Shrink wrap sleeve (Vector 70) 1
20 K403-014 Knob, locking-key, female, M8 thread, 40 mm wide 1
21 3219-211 Washer 1
22 3219-288 Clamp shaft (telescopic pan bar) (Vector 70) 1
23 M500-082 Nut, M6, standard (hex), full 1
24 M600-304 Washer, plain, large, M4 1
25 M005-511 Screw, button head, socket, M4 x 8 mm long 1
3219-67 Short pan bar and clamp assembly (Vector 70), comprising: