Vinten Vector 70 - Page 93

93
Contents
Previous
Page
First
Page
Next
Page
Previous
View
3354-937SP Vert. Track /Act repair kit V70, comprising:
3354-923SP Vertical track assembly 1
3354-54 Adjustment housing assembly 1
3051-25 Vinten fluid in tin (sales service) 2
3354-206 Slim (Horizontal track member) 10
3354-299 Shim (0.075mm) 10
3354-412 Gasket 1
3354-414 Inner gasket 1
L701-082 Fastener, push-on, standard, 0.156 in. shaft dia. x 0.010 in. thick 1
M004-103 Screw, countersunk head, pozidrive, M3 x 8 mm long 12
M004-812 Screw, grub, cone point, socket head, M3 x 5 mm long 2
M005-706 Screw, cap head, socket, M4 x 16 mm long 4
M005-734 Screw, low-profile, cap head, socket, M4 x 10 mm long 8
M005-912 Screw, countersunk head, socket, M4 x 10 mm long 3
M006-704 Screw, cap head, socket, M5 x 16 mm long 2
M006-705 Screw, cap head, socket, M5 x 20 mm long 2
M006-718 Screw, cap head, socket, M5 x 40 mm long 2
M006-737 Screw, low-profile, cap head, socket, M5 x 6 mm long 1
Q500-040 ’Omniseal’, 1.380 in. shaft dia. x 3/32 in. nominal section 1
Fig 6.14 Vector 70/70H Pan and Tilt Head - Composite Spare Parts (Cont)
Part No Nomenclature Qty