17
© 2013 Directed. All rights reserved.
AUX 3
Press and release AUX
Activates (or if On, deactivates) the Aux 3 output. The Aux LED and
On tones or Off tones play to confirm.
Runtime Remaining
Press and hold the button
Requests the remaining Remote start runtime and temporarily displays
it in 4 increments using the confirmation LED’s.
Example for 12 minute runtime:
s Three LED’s: six to nine minutes remaining (50 - 75% of time
selected).
s One LED: less than three minutes remaining (<25% of time se-
lected).
Note
Remote Start must be On to use this feature.
* See “Sensor Silent Arm protection” on page 24 for more details.
** See
“Advanced Start” on page 28 for details.
To Next Page
Loading...
