EasyManua.ls Logo

Viper 5806V - Page 32

Viper 5806V
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
© 2013 Directed. All rights reserved.
cally start the engine to maintain battery charge or combat extreme
cold when parked for an extended period of time.
Precautions for the Advanced Start features:
s Park the vehicle in a well ventilated area away from windows
and doors that lead into inhabited spaces.
s Arm and Lock the vehicle, the engine will not start unless the
doors are locked.
s Only one Advanced start feature can be enabled at any given
time.
s For manual transmission vehicles MTS mode must be enabled
before Timer Start or Smart Start can be activated.
s Timer Start or Smart Start mode automatically exits when the ve-
hicle is disarmed.
Timer Start operation
Activation begins a countdown timer as set by the installer (de-
fault three hours). When the timer expires the engine starts and
the Remote Start On message is sent to the remote control. When
the Remote start runtime expires the engine shuts off, the Remote
Start Off message is sent to the remote control and the count-
down timer restarts. This will repeat as many times as set by the
installer (default 6 starts). Timer Start is exited after the final start.
Smart Start operation
Smart Start uses the settings for Timer Start in addition to tem-
perature and battery level to automatically start the engine. Ac-
tivation begins the countdown timer. When the timer expires the
vehicle interior temperature and battery level is checked and, if
the Temperature is above 100°F, below 0°F, or the battery level
is below 10.5V, the engine will start and the Remote Start On

Table of Contents

Related product manuals