Viper 771XV - System Configuration and Learning; Tach Learning Procedure; Programming Jumpers

© 2005 Directed Electronics—all rights reserved
3355
ttaacchh lleeaarrnniinngg
TToo lleeaarrnn tthhee ttaacchh ssiiggnnaall::
1. Start the vehicle with the key.
2. Within 5 seconds, press and
HHOOLLDD
the Valet/Program switch.
3. The LED will light constant when the tach signal is learned.
4. Release the Valet/Program switch.
pprrooggrraammmmiinngg jjuummppeerrss
DRW-96