virtual access GW1000M Series - Page 16

_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
© Virtual Access 2021 Confidential Page 16 of 23
12. When you have made all your changes, you can view a change summary by
clicking UNSAVED CHANGES in the top menu.
Figure 12: The unsaved changes button in the top menu
A list of unsaved changes appears.
13. To save the changes, click Save & Apply.
14. When the changes have been saved, you can switch the router’s configuration file
to config1.
15. Click System -> Backup/Flash Firmware.
Figure 13: The flash operations page
16. In the Flash operations page, click Switch config. A rebooting message appears.