virtual access GW1000M Series - 5 Upgrading Router Firmware

_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
© Virtual Access 2021 Confidential Page 18 of 23
5 Upgrading router firmware
This chapter describes how to upgrade router firmware. The upgrade process is as
follows:
• Firmware is transferred to the device.
• Firmware is checked to ensure there are no corruptions.
• Firmware is saved to persistent storage.
• Data in persistent storage is validated.
To avoid any unrecoverable errors during the process, you must follow several safety
steps described in this chapter.
On successful completion of the process, you can restart the device running the new
firmware.
5.1.1 Identify your software version
To check which software version your router is running, in the top menu, browse to
Status -> Overview.
Figure 17: The status page showing a software version prior to 72.002