Vision MAX Pro User Manual

Vision Max Pro User Manual122
© 2015 Vision Engraving Systems
We now import clipart to add style to the sign. To import the file, select File Import from the top menu
bar. This will open the Import File window. The file we are importing is BORD0117 and is located in the
C:\Vision Express 9\ClipArt\BORDER folder. Select the file, then click on Import. Click inside the plate
area to finish importing the file.
Change the size to 1.5 inches wide by 0.651 high and change the position to 3.00 inches X and 1.25
inches Y as shown, using the top toolbar fields. Make sure the center "Nub" is selected when positioning
graphics using center coordinates.

Vision MAX Pro Specifications

General

Brand	Vision
Model	MAX Pro
Category	Engraver
Language	English