Vision MAX Pro User Manual

Introduction 5
© 2015 Vision Engraving Systems
1 Introduction
About This Manual
This manual is designed to provide you with information about your Vision Max Pro Engraver,
beginning with unpacking the machine and continuing through installation, operation and maintenance.
This manual does not attempt to teach the user how to become an expert in engraving, computer
usage, or engraving software usage. Some previous knowledge of engraving terms and the engraving
process is certainly beneficial. For information on the Vision Engraving Software, see the Vision
Engraving Software manual. For more information on your individual computer system, see your
computer's user manual or contact your computer distributor.
To begin, locate the White/Blue Dongle or Orange Dongle or USB
Stick included with your machine in the Accessories Box
Important Note:
The Vision software is available in two versions; one with a dongle, and one
that is "dongle-less" and is loaded on to a USB Memory stick.
If your machine was delivered with, or you currently have the white/blue or
orange software dongle, DO NOT LOSE IT!
The Vision software will NOT run without the dongle plugged into the
computer.

Vision MAX Pro Specifications

General

Brand	Vision
Model	MAX Pro
Category	Engraver
Language	English