Visonic PowerMaster-360R - Page 17

Menus and functions
D-307084 PowerMaster-360R User's Guide 17
C. User settings options menu
Click until the display reads the required setting option and then press .
SET ZONE BYPASS
Use to bypass a faulty (exclude) or unsecured ("disturbed") zone, or to clear a
bypassed zone. For further details and programming procedure see section B.1.
3
REVIEW BYPASS
Use to quickly review the bypass scheme that is to see which zones are
bypassed. For further details and reviewing procedure see section B.2.
3
RECALL BYPASS
Use to recall the last used bypassed scheme for reuse in next arming period. For
further details and recalling procedure see section B.3.
3
USER CODES
Use to program the master user secret access code and the remaining seven
other user codes. For further details and programming procedure see section
B.4.
DURESS CODE
Use to program the duress code. For further details and programming procedure
see section B.5.
PROXIMITY TAGS
Use to add new Proximity Tags to or to delete Proximity Tags when lost. For
further details and programming procedure see section B.6.
KEYFOBS
Use to add a new keyfob transmitters or to delete a keyfob transmitter if for
example the keyfob is lost. For further details and programming procedure see
section B.7.
TIME & FORMAT
Use to set the time clock to show the correct time and time format. For further
details and programming procedure see section B.8.
DATE & FORMAT
Use to set the calendar date to show the correct date and date format. For further
details and programming procedure see section B.9.
AUTO-ARM ENABLE
Use to enable or disable the option daily arming at predefined times (see Auto-
Arm Time setting). For further details and programming procedure see section
B.10.
AUTO-ARM TIME
Use to set the predetermined time for automatic daily arming if enabled (see Auto-
Arm Enable setting). For further details and programming procedure see section
B.11.
PRIVATE REPORT
Use to program the four private telephone numbers for reporting alarm and other
event messages to private subscribers. For further details and programming
procedure see section B.12.
SQUAWK
Use to enable or disable the squawk sound that is arm / disarm feedback
indication. For further details and programming procedure see section B.13.
SCHEDULER
Use to set the daily / weekly time schedule for start and stop activation of devices
connected to the PGM outputs. For further details and programming procedure
see section B.14.
VOLUME CONTROL
Use to adjust the volume level of the various system beeps, and chime signal. For
further details and programming procedure see section B.15.
SERIAL NUMBER
Use to read the system serial number and similar data see section B.16.
PLNK curr.params
Use to read the current IP address of the PowerLink and similar data see section
B.17.
<OK> TO EXIT
Use to exit from the “USER SETTINGS” menu back to Main Menu. For further
details see section A.2.
Returns to
first option