Visonic PowerMaster-360R - Reviewing the Zone Bypass Scheme; Recalling the Zone Bypass Scheme

Menus and functions
20 D-307084 PowerMaster-360R User's Guide
7.
Kitchen
When the zone you wish to clear bypass appears on the display (for
example, "Z04"), press to confirm. You can also identify the device
by looking for the "it's me" LED indication on the displayed device.
<OFF> TO CLEAR
The display now reads [<OFF> TO CLEAR].
5
8.
To clear the bypassed zone, press the button.
Z04: READY
A "Success Tune" ☺ sounds and the updated zone status is now
displayed, i.e. [ Z04: READY ] or [ Z04: NOT READY ].
9
B.2 Reviewing the zone bypass scheme
 Here you can quickly review the bypass scheme that is the zones that are set to be bypassed when the
system is next armed.
1.
REVIEW BYPASS
Enter the [USER SETTINGS] menu and select the [REVIEW BYPASS]
1
option and press .
2
2.
BYPASS LIST
The display reads [BYPASS LIST]
or
Click the or buttons repeatedly to review all bypassed
zones in ascending numerical order. When done, click to exit.
9
3.
Z04: BYPASSED
Z04: P1 P2 P3
4
Kitchen
B.3 Recalling the zone bypass scheme
 Use this option to repeat (recall) the most recent Bypassed Scheme for use during the next arming session.
1.
RECALL BYPASS
Enter the [USER SETTINGS] menu; select the [RECALL BYPASS]
1
option
and press .
2, 6
2.
<OK> TO RECALL
The display now reads [<OK> TO RECALL].
7
To recall the last used bypass scheme press .
3.
Bypass RECALLED
A "Success Tune" ☺ sounds. The display reads [ Bypass RECALLED ] and
then returns to “ USER SETTINGS " step 1.
9
☺ Return to step 1