Visonic PowerMaster-360R - Powermaster-360 R Panel Indicators and Keys

Introduction
4 D-307084 PowerMaster-360R User's Guide
within the protected area and send out an alert message if no movement is detected for a predefined period of
time. See Chapter 4. Menus and functions for details.
 Distress calls: Keyfobs may be used to activate this function by the simultaneous pressing of two buttons.
 Disarming under duress: If a user is forcibly compelled to disarm the system, they can do so using a special
code ("Duress Code") that disarms the system as usual, but also sends a silent alarm to the monitoring
station. See Chapter 2. Operating the PowerMaster-360R for details.
 System supervision: All wireless peripherals within the protected site send periodic keep alive supervision
messages. If such a message is overdue, the Keypad displays a 'missing' TRBL message. Your installer can
disable this feature if not required.
 Battery supervision: The PowerMaster-360R continuously monitors the battery condition of the sensors and
devices in the system and the Keypad displays a ‘Low Battery’ message whenever a battery needs to be
replaced within a maximum of 30 days. Wireless sirens can still provide 2 siren alarms before the siren
becomes totally inactive.
Note: When the ‘Low Battery’ message is received, the battery should be replaced within 7 days. The
PowerMaster-360R battery is rechargeable, see Chapter 8 Maintenance for troubleshooting information.
PowerMaster-360R panel indicators and keys
Figure 1. PowerMaster-360R
Led indicators
Label
Function
Power (Green) indicates that your system is connected to the power outlet.
Arming Status (Flashing Red / static Red) indicates HOME or AWAY.
Trouble condition (TRBL) (Orange) lights when the system detects an abnormal condition
caused by a fault, see Chapter 3 for details.
Service Server (Blue) lights when the system is connected to the security server.
Smart Home Service (Blue) lights when the system is connected to the smart home server.
WiFi (Green) indicates if the WiFi module is enabled or disabled. The light blinks fast when
activating or deactivating a WiFi access point and blinks slowly when the WiFi access point is active.
Control keys
A
B
C
D
E
F
Display
Keys