Menus and functions
18 D-307084 PowerMaster-360R User's Guide
A.2 Returning to the previous step or exiting the USER SETTINGS menu
During the setting process it is frequently necessary to return to the previous setting step or option (i.e. "to go
one level up") or to exit the User Settings menu.
A. To move one level up
To move one level up during the setting process, click once. Each click takes you one level up or to the
previous setting step:
B. To exit the USER SETTINGS menu
To exit [USER SETTINGS], move up the menu by pressing repeatedly
until the display reads [<OK> TO EXIT], or preferably, press once which
brings you immediately to the exit screen [<OK> TO EXIT].
When the display reads [<OK> TO EXIT], press
The system exits the [USER SETTINGS] menu and returns to the normal disarm
state while showing the READY display.
A.3 Keys used for navigation and settings
You can use the keypad for various programming functions. The following table provides a description of the
keys and their functions:
Navigation / Setting Function
Move forward to the next menu options.
Move backward to the previous menu options.
Select a menu option or to confirm a setting or action.
Manual activation of a light or other household electrical appliance that
is connected to PGM output.
Arm building when occupied.
Manual deactivation of a light or other household electrical appliance
that is connected to PGM output.
Select the active automatic control method:
Sensors: The appliance is controlled by sensors (assigned
by the installer for this).
Timer: The appliance is controlled by a timer (ON and OFF
times are defined by the installer).
Both: The appliance is controlled by sensors as well as by a
timer.
Cancel entry delay when system is armed to home or away.
Configure an emergency alarm.
Enter numerical data, where applicable.
B.1 Setting the zone bypass option
Bypassing permits arming only part of the system while allowing free movement of people within certain zones
To Next Page
Loading...
