Menus and functions
D-307084 PowerMaster-360R User's Guide 25
To assign the tag to another user, for example, "User No. 5", key in [05] or
alternatively click the or button until the display reads
[T05:Tag (Prox)] and then press to confirm.
The display reads [
DEVICE ENROLLED
] a "Success Tune" ☺ sounds and
the display will then change to [
T01:Tag (Prox)
].
5 6
B. To set partition authorization
C. To delete a proximity tag
Enter the [USER SETTINGS] menu, select the [PROXIMITY TAGS] option
and press .
1
The display will read [ADD NEW TAG].
Click the button until the display reads [DELETE TAG].
The display will read [T01:Tag (Prox)].
2, 7
Key in the tag number you wish to delete, for example, [05] or alternatively
click the or button until the display reads the tag number,
[T05:Tag (prox)].
When the tag you wish to delete appears on the display, press .
The display now reads [<OFF> to delete].
8
To delete the tag press the button.
A "Success Tune" ☺ sounds and the display reads [
DELETE TAG
] and
returns to step 3.
12
Additional information (section B.6)
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.
The display shows the first enrolled Tag (Tag No.1) of the 32 tags.
To cancel the enrollment process press the button.
If the tag was previously enrolled in the system, the Keypad display reads [
ALREADY ENROLLED
] and
then switches to the name of the tag alternating with its ID number.
If Partition is enabled, continue to step 6.
When PARTITIONING is enabled.
The display will read [T05:PARTITIONS].
9
Use the keypad keys , , to change the status of the
partitions P1, P2 & P3, respectively.
10
When you are satisfied with the setting, for example, User 5 is authorized
with Partition 1 and 3 only, press to confirm.
A "Success Tune" ☺ sounds. The display confirms the Partition setting.
11
To Next Page
Loading...
