Menus and functions
32 D-307084 PowerMaster-360R User's Guide
B. To program SMS telephone numbers
Click the or button until the display reads the SMS phone
number you wish to program or edit (out of 4 SMS numbers), for example,
"2nd SMS tel#", and press .
To program or edit the phone number, at the blinking cursor position enter
the SMS phone number, for example, “5080168593”, using the numerical
keypad.
5, 6
When done, press to confirm.
A "Success Tune" ☺ sounds, the display confirms the SMS phone number
and returns to step 7.
7, 10
C. To program SMS permissions
Click the or button until the display reads the SMS
Permission and press .
The display shows the currently selected setting
Click the or button until the display reads the option that
you require.
When you select the ‘From Any’ option, SMS commands are accepted from
any number.
To enter this option, press
.
When you select this option, the SMS commands only are accepted from the
four numbers defined in the private SMS report.
When done, press to confirm.
Email by server
A. To program events to be reported by email through the server
Enter the [USER SETTINGS] menu, select the [PRIVATE REPORT] option
and press .
1
When the display reads [SMS REPORT] press .
To enter this option, press
. The display reads [1st E-MAIL].
Click the or button until the display reads the email you
wish to program (out of 4 emails), for example, [2nd E-MAIL] and then press
.
The display reads [Address].
Click the button. The display reads [E-MAIL Events].