Visonic PowerMaster-360R - Page 36

Menus and functions
36 D-307084 PowerMaster-360R User's Guide
Additional information (section B.12)
1
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.
2
This option allows you to program the events to be reported. To program SMS numbers, click the
or button until the display reads the required option.
3
The display shows the currently selected option (indicated by a

symbol), for example, " disable report ".
Using the or buttons you can now select the events you wish to be reported to SMS
numbers according to the options provided in the table below:
Event Group Option
Events to be reported
disable report
No message are reported
all
All messages
all (-op/cl)
All messages, except arming & disarming
all (-alerts)
All messages, except alerts
alarms
Alarm messages only
alerts
Alert messages only
op/cl
Arming and disarming (open/close) only
4
The

symbol now appears next to the new selected option.
5
a. The display shows the phone number or email currently programmed in this location (for example,
1032759641). The cursor blinks on the first digit of the code.
b. If the location is free the display is blank ( - - - - ).
6
You can move the cursor to the next or previous location (digit) using the or button.
7
Within the SMS menu, you can now repeat steps 7 - 9 to program or edit another SMS phone number.
Within the Email menu, you can now repeat steps 10 - 13 to program or edit another email.
To end this session and return to previous menu options, press the button.
8
The display shows the currently selected option (indicated by a

symbol), for example, " disable report ".
Using the or buttons you can now select the events you wish to be reported to emails or
SMS by server according to the options provided in the table below:
Event Group Option
Events to be reported
disable report
No message is reported
all
All messages
alarm
Alarm messages only
alarm+trbl
Alarm and trouble (TRBL) messages
alarm+o/c
Alarm messages, including arming & disarming
alarm+alrt
Alarm and alert messages
alarm+alrt+trbl
Alarm, alert and trouble (TRBL) messages
alarm+alrt+o/c
Alarm and alert messages, including arming & disarming
alarm+trbl+o/c
Alarm and trouble (TRBL) messages, including arming & disarming
alert
Alert messages only
alert+o/c
Alert messages, including arming & disarming
alert+o/c+trbl
Alert and trouble (TRBL) messages, including arming & disarming
alert+trbl
Alert and trouble (TRBL) messages
trouble
Trouble messages only
trouble+o/c
Trouble messages, including arming & disarming
open/close
Arming and disarming (open/close) only
9
The display shows the currently selected option (indicated by a

symbol), for example, " disable report ".
Using the or buttons you can now select the events you wish to be reported to MMS
telephones numbers according to the options provided in the tables below:
Event Group Option
Events to be reported
alarm+alrt
Alarm and alert messages
alarm
Alarm messages
alert
Alert messages
disable report
No message will be reported
10
You can now, select other options, end this session – (see section A.1 and section A.2), or quit
programming (see section A.3).