Visonic PowerMaster-360R - Page 40

Menus and functions
40 D-307084 PowerMaster-360R User's Guide

Carefully read the section titled “Additional Information” according to the indicated references etc. – see the
table at the end of this section.
1.
VOLUME CONTROL
Enter the [USER SETTINGS] menu, select the [VOLUME CONTROL]
option and press .
1
2.
KP beeps vol.
The display will read [KP beeps vol.]. To enter this option press .
MID 
The display shows the currently selected option.
2
3.
or
Click the or button until the display reads the desired
volume level for the keypad beeps, for example, [MAX].
3
MAX
4.
When you are satisfied with the setting, press to confirm.
6
MAX 
A "Success Tune" ☺ sounds. The display confirms the saved setting,
then returns to step 2.
4, 7, 8
☺ Return to step 2
B. To Adjust the Volume Level of the Chime Signal
5.
or
Click the or button until the display reads [Chime signal
vol], and press .
6.
Chime signal vol
MID 
The display shows the currently selected option.
2
7.
or
Click the or button until the display reads the desired
volume level for the chime signal, for example, [MAX].
3
MAX
8.
When you are satisfied with the setting, press to confirm.
6
MAX 
A "Success Tune" ☺ sounds. The display confirms the saved setting,
then returns to step 6.
4, 8
☺ Return to step 6