Vitec Multimedia MGW Ace Decoder OG User Manual

MGW Ace Decoder OG
User Manual, Version 2.0 12
2. Type the password (the default password is "1qaz!QAZ") and click the blue arrow. The
MGW Ace Decoder OG interface is loaded.
3. From the main menu, select System. The system page opens:
Figure 4-1: The System page
4. Set the below parameters required for your network and click Apply.
Parameter Description
IPv4 Address Type Select between Static IP or DHCP+Zeroconf mode.
If a Static IP is used, its respective fields must be filled.
IP Address Enter the static IP address.
Subnet Mask Enter the subnet mask address.
Default Gateway Enter the default gateway address.
5. Set the below parameters that are required for your network and click Apply.
To discover MGW Ace Decoder OG through mDNS/Bonjour:
The service based on mDNS specification, provides below information:
 Decoder Name (Instance): MGW Ace Decoder OG
 Available Services: HTTP web interface and API service are described.
 Domain: local. The Hostname is visible for the user to identify its units easily.
By default, the discovery service is enabled. The user can disable it using the web interface.

Vitec Multimedia MGW Ace Decoder OG Specifications

General

Brand	Vitec Multimedia
Model	MGW Ace Decoder OG
Category	Media Converter
Language	English