Vivitek DU6771 - OSD Navigation Basics; OSD Menu Navigation

DU6771 DLP Projector User Manual
31
UN67711216EN00
Using the projector
Using On-Screen Display
The projector has an On-Screen Display (OSD) that lets you make image adjustments, change various settings and
check current projector status.
Navigating the OSD
You can use the remote control or the control buttons on the projector to navigate and make changes to the OSD. The
following illustration shows the corresponding buttons on the remote control and on the projector
1. To open the OSD, press the Menu button on the OSD
control panel or remote control. There are five folders on the
menu. Press the cursor ◄ or ► buttons to move through
secondary menus.
2. Press ▲or▼ to select menu items and ◄or► to change
values for settings. Press to confirm the new setting.
3. Press RETURN to leave a submenu or MENU to close
menu