Vivotek FD8161 - Page 122

VIVOTEK
122 - User's Manual
352x288,
4CIF,
704x480,
704x576
(product
dependent)
s<0~(m-1)>_enableeptz <boolean> 4/4 Indicate whether to support eptz
s<0~(m-1)>_mpeg4_intr
aperiod
250, 500,
1000, 2000,
3000, 4000
4/4 Intra frame period in milliseconds.
s<0~(m-1)>_mpeg4_rate
controlmode
cbr, vbr 4/4 cbr, constant bitrate
vbr, fix quality
s<0~(m-1)>_mpeg4_qua
nt
1~5,99 4/4 Quality of video when choosing vbr in
“ratecontrolmode”.
0 is the customized manual input setting.
1 = worst quality, 5 = best quality.
s<0~(m-1)>_mpeg4_bitr
ate
1000~800000
0
4/4 Set bit rate in bps when choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_mpeg4_ma
xframe
1~25,
26~30 (only
for NTSC or
60Hz CMOS)
1/4 Set maximum frame rate in fps (for MPEG-4).
s<0~(m-1)>_mpeg4_qval
ue
2~31 4/4 Manual video quality level input - choose
customize input “mpeg4_quant = 0” (for
MPEG-4).
s<0~(m-1)>_h264_intrap
eriod
250, 500,
1000, 2000,
3000, 4000
4/4 Intra frame period in milliseconds.
s<0~(m-1)>_h264_ratec
ontrolmode
cbr, vbr 4/4 cbr, constant bitrate
vbr, fix quality
s<0~(m-1)>_h264_quant 1~5,99 4/4 Quality of video when choosing vbr in
“ratecontrolmode”.
0 is the customized manual input setting.
1 = worst quality, 5 = best quality.
s<0~(m-1)>_h264_qvalu
e
0~51 4/4 Manual video quality level input - choose
customize input “h264_quant = 0” (for
MPEG-4).
s<0~(m-1)>_h264_bitrat
e
1000~800000
0
4/4 Set bit rate in bps when choosing cbr in
“ratecontrolmode”.