Vivotek FD8161 - Page 125

VIVOTEK
User's Manual - 125
NAME VALUE SECURITY
(get/set)
DESCRIPTION
brightness -5~5 4/4 Adjust brightness of image according to mode
settings.
saturation -5 ~ 5 4/4 Adjust saturation of image according to mode
settings.
contrast -5 ~ 5 4/4 Adjust contrast of image according to mode
settings.
sharpness -5 ~ 5
<product dependent>
4/4 Adjust sharpness of image according to mode
settings.
IBPE_edgeenable <boolean> 4/4 Enable edge enhancement.(Haydn only)
IBPE_edgestrength 1 ~ 128 4/4 Adjust edge enhancement strength. 1 is
minimum and 128 is maximum. (Haydn only)
IBPE_nrenable <boolean> 4/4 Enable noise reduction. (Haydn only)
IBPE_nrmode 1 ~ 3 4/4 Adjust noise reduction mode.
1 => DeGaussian
2 => DeImpulse
3 => DeGaussian + DeImpulse
(Haydn only)
IBPE_nrstrength 1 ~ 63 4/4 Adjust noise reduction strength. 1 is minimum
and 63 is maximum. (Haydn only)
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE SECURITY
(get/set)
DESCRIPTION
brightness -5 ~ 5 4/4 Preview of brightness adjustment of image
according to mode settings.
saturation -5 ~ 5 4/4 Preview of saturation adjustment of image
according to mode settings.
contrast -5 ~ 5 4/4 Preview of contrast adjustment of image
according to mode settings.
sharpness -5 ~ 5
<product dependent>
4/4 Preview of sharpness adjustment of image
according to mode settings.
IBPE_edgeenable <boolean> 4/4 Preview of adjusting enabling edge
enhancement. (Haydn only)
IBPE_edgestrength 1 ~ 128 4/4 Preview of adjusting edge enhancement
strength. 1 is minimum and 128 is maximum.
(Haydn only)
IBPE_nrenable <boolean> 4/4 Preview of adjusting enabling noise reduction.