Vivotek FD8161 - Page 133

VIVOTEK
User's Manual - 133
audio_aec <boolean> 0/7 Indicate whether to support acoustic echo
cancellation.
audio_extmic <boolean> 0/7 Indicate whether to support external
microphone input.
audio_linein <boolean> 0/7 Indicate whether to support external line
input.
audio_lineout <boolean> 0/7 Indicate whether to support line output.
audio_headphoneou
t
<boolean> 0/7 Indicate whether to support headphone
output.
audioin_codec <a list of the available
codec types separated
by commas)
0/7 Available codec list.
audioout_codec <a list of the available
codec types separated
by commas)
0/7 Available codec list.
camctrl_httptunnel <boolean> 0/7 Indicate whether to support “http tunnel” of
PTZ control.
camctrl_httptunnelcl
ient
<boolean> 0/7 Indicate whether to support “http tunnel
client” of PTZ control.
camctrl_privilege <boolean> 0/7 Indicate whether to support “Manage
Privilege” of PTZ control in the Security
page.
uart_httptunnel <boolean> 0/7 Indicate whether to support HTTP tunnel for
UART transfer.
transmission_mode Tx,
Rx,
Both
0/7 Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
network_wire <boolean> 0/7 Indicate whether to support Ethernet.
network_wireless <boolean> 0/7 Indicate whether to support wireless.
wireless_s802dot11
b
<boolean> 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802dot11
g
<boolean> 0/7 Indicate whether to support wireless
802.11g.
wireless_beginchan
nel
1 ~ 14 0/7 Indicate the begin channel of wireless
network
wireless_endchanne
l
1 ~ 14 0/7 Indicate the end channel of wireless
network
wireless_encrypt_w
ep
<boolean> 0/7 Indicate whether to support wireless WEP.