Vivotek FD8335H - Per-Channel Image Quality Settings

VIVOTEK
144 - User's Manual
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of
image according to
mode settings.
saturation -5~5 0 4/4 Adjust saturation of
image according to
mode settings.
contrast -5~5 0 4/4 Adjust contrast of
image according to
mode settings.
sharpness -3~3 0 4/4 Adjust sharpness of
image according to
mode settings.
gammacurve 0,45,50,60,70,80,90,100 0 4/4 Gamma curve.
lowlightmode <boolean> 1 4/4 Enable/disable low
light mode.
profile_i0_enable <boolean> 0 4/4 Enable/disable this
profile setting
profile_i0_policy day,
night,
schedule
night 4/4 The mode which the
profile is applied to.
profile_i0_begintime hh:mm 18:00 4/4 Begin time of
schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule
mode.
profile_i0_brightness -5~5 -5 4/4 Adjust brightness of
image according to
mode settings.
profile_i0_saturation -5~5 0 4/4 Adjust saturation of
image according to
mode settings.
profile_i0_contrast -5~5 0 4/4 Adjust contrast of
image according to
mode settings.
profile_i0_sharpness -3~3 0 4/4 Adjust sharpness of