Vivotek FD8335H - System Log and SNMP Network Management; System Log Configuration and Remote Backup; SNMP Protocol Configuration and Enablement

VIVOTEK
User's Manual - 151
7.21 System log
Group: syslog
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enableremotelog <boolean> 0 6/6 Enable remote log.
serverip <IP address> <blank> 6/6 Log server IP address.
serverport 514,
1025~65535
514 6/6 Server port used for log.
level 0~7 6 6/6 Levels used to distinguish the
importance of the
information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
setparamlevel 0~2 0 6/6 Show log of parameter
setting.
0: disable
1: Show log of parameter
setting set from external.
2. Show log of parameter
setting set from external and
internal.
7.22 SNMP
Group: snmp (capability.snmp > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
v2 0~1 0 6/6 SNMP v2 enabled. 0 for disable, 1 for
enable
v3 0~1 0 6/6 SNMP v3 enabled. 0 for disable, 1 for
enable