VIVOTEK
User's Manual - 81
Privacy mask
Advanced Mode
Click Privacy Mask to open the settings page� On this page, you can block out sensitive zones to
address privacy concerns�
■ To set the privacy mask windows, follow the steps below:
1� Click New to add a new window�
2� You can use the mouse cursor to size and drag-drop the window, which is recommended to be at least
twice the size of the object (height and width) you want to cover�
3� Enter a Window Name and click Save to enable the setting�
4� Click on the Enable privacy mask checkbox to enable this function�
►
Up to 5 privacy mask windows can be set up on the same screen�
► If you want to delete the
privacy mask
window, please click the ‘x’ on the upper right corner of the
window�
NOTE:
2010/12/09 17:08:562010/12/09 17:08:56
To Next Page
Loading...
