Vivotek ND8312 - Initial Configuration - via a Web Console (Optional)

VIVOTEK - Built with Reliability
User's Manual - 25
6
2. From a management computer, download and execute the Shepherd utility software. Follow
the onscreen instructions to complete the installation.
1. Connec the power cord to start the NVR. Wait for the system status LED to light green.
If you already congured the system using an Ethernet web console, please skip the Auto Setup
steps when you connect the HDMI cable.
You may accidentally format your storage
volumes!
IMPORTANT:
3. Start the Shepherd utility. The Shepherd utility will discover the NVR located in the same
subnet.
0002D1730202
IB8360-W 192.168.4.151 00-02-D1-73-02-02
ND8212W
Initial Conguration - via a Web Console (Optional)